热收缩膜用于各种产品的销售和运输,其主要作用是稳固、遮盖和保护产品.收缩膜必须具有较高的耐穿刺性,良好的收缩性和一定的收缩应力.在收缩过程中,薄膜不能产生孔洞.由于收缩膜经常适用于室外,因此需要加入UV抗紫外线剂.

Heat shrinkable film for sale and transport of various products, its main effect is stable, covering and protection products. The shrink film must have high puncture resistance, good shrinkage and shrinkage stress. In the process of contraction, the film does not produce holes. Due to shrinkage film often apply to outdoor, therefore need to join UV anti UV agent.

具有较高的柔韧性、不易破损、抗爆破力强、抗撞击性能强、抗撕裂性能强、拉力强,可替代箱包装.

It has high flexibility, not easy to break, strong explosion resistance, strong impact resistance, strong tearing resistance and strong pulling force. It can be used instead of case packing

收缩率大,热收缩后能紧裹物品、若制成PE直通袋(袋的两端开口)经热收缩后,开口的两端可以提起物品,能承受15KG重量,便于搬运.

The utility model has the advantages that the shrinkage is large, and the material can be tightly wrapped after the heat contraction, and the PE straight bag (the opening at both ends of the bag) can be made into the bag, and the two ends of the opening can be lifted after the heat contraction, and the utility model can withstand 15KG weight and is convenient for carrying

透明度佳、透光率达80%,能显示产品,能无形宣传产品,同时也减少了在物流通环节的配送错误.

Transparency, light transmittance of 80%, can display products, products can be invisible publicity, but also reduces the logistics links in the delivery errors

防潮、防水、防尘,既能达到包装效果,也能美观产品、保护产品.

Moisture-proof, waterproof and dustproof, not only can achieve the packaging effect, but also beautiful products, protect products

①PVC热收缩膜应贮藏在卫生、温度低于30℃，最好能够低于25℃，湿度在45%-75%的库房内；

PVC heat shrinkable film should be stored in health, temperature below 30 degrees, preferably less than 25 degrees, humidity in the 45%-75% warehouse;

②产品需要避免阳光直射；

Products need to avoid direct sunlight;

③PVC热收缩膜产品距离热源不少于1米；

PVC heat shrinkable film products are not less than 1 meters from the heat source;

④严禁踩踏和锋利物同时搬运产品；

No trampling and sharp objects are transported simultaneously;

⑤热缩袋使用的最佳时间为生产之日起六个月内。

The optimum time for the use of shrink bags is six months from the date of production.