联系我们

公司名称:XXX

电话:XXX

手机:XXX

联系人:XXX

地址:XXX

新闻动态
伸缩门的结构。
伸缩门的结构。
The structure of the telescopic door.
它首先是啮合,两行联动不如三行联动,单滑不如双滑,叉四孔不如六孔等。伸缩门网的结构不同于伸缩门的结构。其次,我们需要找到合适的地方添加材料。例如:伸缩门是最重要的网目,网孔质量对住宅的膨胀门有致命的影响,其中材料比原材料厚得多。
It is first engaged, and two row linkage is not as good as three row linkage, single sliding is not as good as double sliding, and fork four holes are not as good as six holes. The structure of the telescopic door network is different from that of the telescopic door. Secondly, we need to find suitable places to add materials. For example, expansion doors are the most important mesh, and the quality of the mesh has a fatal impact on residential expansion doors, where the material is much thicker than the raw material.
二、驱动头的结构。
2、 The structure of the driving head.
这是最潜在的泄漏安全隐患,内部布线混乱,头部框架在粗加工中防水不高,软线软胶不高,易老化裂纹,以及电机、控制器等。
This is the most potential leakage safety hazard, with chaotic internal wiring, low waterproof performance of the head frame during rough machining, low adhesive strength of the flexible wire, easy aging and cracking, as well as motors and controllers.
高质量电动伸缩门具有很高的防晒能力,可长期经受风雨。外壁应具有完整的外形,外表光滑无损,平板电动伸缩门内壁较厚。截面内不会出现气泡、压力、裂纹等。所选用的五金件应采用金属材料,其内在强度、外观和质量应经久耐用。该门工艺精良,焊接角度牢固、整齐、美观。
High quality electric retractable doors have high sun protection ability and can withstand wind and rain for a long time. The outer wall should have a complete appearance, with a smooth and undamaged appearance, and the inner wall of the flat electric telescopic door should be thicker. There will be no bubbles, pressure, cracks, etc. in the cross-section. The selected hardware should be made of metal material, and its internal strength, appearance, and quality should be durable. The door has excellent craftsmanship, and the welding angle is firm, neat, and aesthetically pleasing.
伸缩门怎么调整?
How to adjust the telescopic door?
第一、首先,检查门是否正常运行,您可以选择手动推拉门,并且在确定门正常运行的情况下,可以打开电源。
Firstly, check whether the door is operating normally. You can choose to manually push and pull the door, and after confirming that the door is operating normally, you can turn on the power.
第二、其次,电源接通后,控制箱的电源指示灯亮起,门体可自动打开到设定位置,按“打开”按钮自动停止。按下“按钮”按钮,门可自动关闭至泥杆 保定古筝 塑料增韧剂 拱形护坡模具 保定空调维修  托辊生产线设定限位自动停止。每个按钮将有一个相对指示灯打开。
Secondly, after the power is turned on, the power indicator light of the control box lights up, and the door body can automatically open to the set position. Press the "Open" button to automatically stop. Press the "button" button, the door can automatically close to the set limit and stop automatically. Each button will have a relative indicator light on.
第三、如果门操作极限不准确,则可以调节限位开关的高度。调试运行5次以上,如果一切正常,可以投入使用。
Thirdly, if the door operating limit is not accurate, the height of the limit switch can be adjusted. Debug and run more than 5 times, and if everything is normal, it can be put into use.

联系方式

  1. 公司名称:XXX
  2. 电话:XXX
  3. 手机:XXX
  4. 联系人:XXX
  5. 地址:XXX

版权 © 滨州电动伸缩门匠心厂 网址:shousuomo.37ix.com.cn  推荐:滨州电动伸缩门,滨州车牌识别,滨州道闸,滨州岗亭,滨州悬浮门

网站建设及优化保定遨游网络公司